Storage

Online Catalogue | Dive | Narked at 60 |  Storage

NAS Argon Pouch An argon pouch that allows a 1.5 cylinder to be fixed to the side or base of a back plate. The pouch also protects the cylinder from knocks and scratches and allows a diver easy access to turn the cylinder on and off. Plastic fastenings mean this pouch can be attached to the back plate in seconds. Comes wth two plastic screw sets. Manufactured from heavy duty textured nylon with a mesh nylon top with drawstring toggle and sewn with a nylon thread. Price: £18.00

NAS Backplate Pouch This pouch pads the backplate for comfort and secures an emergency SMB or lifting bag. Comes with plastic backplate clips. The pouch pads the back plate and not only provides comfort on the divers back helping with stress caused by carrying heavy twin sets or multiple cylinder diving. The pouch also secures an emergency SMB or lifting bag. Can be accessed by the top by a buddy by pulling the webbed tab or by the diver themselves by the bottom of the pouch. The pouch has four brass eyelets and comes with plastic clips and can be fitted to the back plate in less then a minute. Manufactured out of heavy-duty textured nylon and sewn with a nylon thread. Price: £45.00

NAS Backplate Side Pockets (pair) Back plate side pockets to be attached to the side of the back plate for easy storage and accessibility of lift bags SMB's etc. Each side pocket is 11 1/2 inch long and 3 inch wide. These pockets are ideal for divers that can’t reach around to get to a back plate tail. Comes with a webbed handle which has a stainless steel secure press stud fastening and two toggles for ease of opening when gloves are worn. Cordura pouch with a polyproprelene webbed handle. Price: £45.00

NAS Backplate Tail Back plate tail Ideal for storing liftbags or DSMB. This tail has attched 2 side pockets useful for storage of spare mask and goody bag. Has 12 brass eyelets for securing deco boys and lifting bags etc. Plastic fastenings mean this tail can be attached to the backplate in seconds. Comes with two side pockets that are approx 11 x 9 inch and have toggles on the zips for ease of opening when wearing gloves. Manufactured from heavy duty textured nylon and sewn with a nylon thread. Price: £45.00

NAS Back Plate Tail With A Pocket Back plate tail Ideal for storing liftbags or DSMB. This tail has a pocket attached that can be accessed either side and is useful for storage of SMB'S or a lifting, or goody bag, etc. The tail also has 8 brass eyelets under the pocket for securing deco buoys and lifting bags etc. Plastic fastenings mean this tail can be attached to the back plate in seconds. Comes with a pocket that is 8 1/2 by 4 1/2 inch and has toggled handles with a stainless steel press stud for added security. The toggles help with opening the pocket when wearing gloves. Manufactured from heavy duty textured nylon and sewn with a nylon thread. Price: £45.00

NAS Back Plate Tail With Double Pockets Back plate tail Ideal for storing liftbags or DSMB. This tail has two pockets attached that can be accessed either side and is useful for storage of SMB's lifting bags or a goody bag etc. Plastic fastenings mean this tail can be attached to the back plate in seconds. Comes with two pockets that is 8 1/2 by 4 1/2 inch and has toggled handles with a stainless steel press stud for added security. The toggles help with opening the pockets when wearing gloves. Manufactured from heavy duty textured nylon and sewn with a nylon thread. Price: £45.00

NAS Stage Mount System Storage tail/streamlined side mount system for back mount of cylinders creating open harness area. Price: £58.00

NAS Expandable Hi Visibility Flag Hi visability safety flag that is only 13 inch by 4 inch when folded. When expanded the flag is 78 inch in length. Safety flag so that divers can be easily located by boats this flag is easily adjustable and a must for boat diving were there is currents or hi swells. A very small expandable flag that can be attached to a divers cam band by using the flag pouch or by attaching surgical tubing around a divers cylinder the pouch also has a belt loop so it can be attached to a harness / weight belt. Comes with a press stud fastening on the flag to keep it securely fastened to the pole. Heavy duty plastic Price: £20.00

NAS Expandable Hi Visibility Flag Pouch Price: £17.00

NAS Front Mounted Storage Tail Price: £45.00

NAS Leg Pocket (glue on) A glue on leg pocket for dry suits or wetsuits. Has a heavy duty plastic zip for fastening with a toggle fastened and is ideal for opening with gloves on. Sizes 7inch width by 10inch height and 4inch depth. Manufactured from heavy duty textured nylon and sewn with a nylon thread. Price: £26.00 Pocket With velcroWith zip

NAS Leg Pocket (strap on) Detachable with 2 adustable leg straps and a top hoop to take a bolt snap or to thread through the harness system. Can optionally be Fastened onto the harness using webbing and a stainless steel three bar slide (not included). Has a Velcro fastening and is ideal for a SMB and a reel. Manufactured from heavy duty textured nylon and sewn with a nylon thread. Price: £30.00

NAS Leg Pocket (strap on with Scissors and Velcro) Price: £46.00

NAS Holdall Bag Kit Bag Kit storage bag ideal for dry suits or modular systems. Features draw string and eyelets and an adjustable shoulder strap. Manufactured from heavy duty textured nylon and sewn with a nylon salt resistant thread. Price: £18.00

Narked at 60 Big Bag A multi purpose dive bag - Be Seen This Dive Season. A Barrel dive bag, Sizes 20 inch in width, Length 30 Inch. This bag can be packed with full Dry or wet suit, Modular system and all auxiliary equipment. No more need for those annoying boxes on boats. Made from 1400 Cordura with a full length stainless steel heavy duty zip, And two carry handballs. Comes with three plastic supports on the base to protect the bottom of the bag, Also the bag has 12 Stainless steel eyelets for ease of drainage. Price: £49.00

NAS Travel Holdall Bag (Barrel Style) Price: £22.00

NAS Net Cutting Scissors Net cutting scissors. Features a two inch belt loop, secured with a stainless steel press stud. The scissors are heavy duty stainless steel trauma shears with a large easily accessible handle. Fitted with a 1 inch webbing securing strap and D-ring for easy opening. The pouch is Manufactured from 2 inch polypropylene webbing Price: £18.00

NAS Tekky Slate Holder Slate holder for storage of cut and bail out tables. Available in both 2 and 3 pocket versions. Features Velcro fastening arm bands. Manufactured using folded polypropylene webbing and nylon thread, sewn around a clear PU inner. Price from: £28.00 Pockets 2 pocket (£28.00) 3 pocket (£30.00)

NAS Tool Pouch This pouch is ideal for the front of harness system for a means of carrying a collection of useful tools. 9x9 inch Velcro fastening with removable separator. 2 inch webbed handle for easy opening with gloves on. Comes with a two inch webbed handle has been designed for ease of opening with thick gloves on. Manufactured from heavy-duty textured nylon and sewn with a nylon thread. Price: £30.00

NAS Tool Pouch (with net cutting scissors) Tool pouch with net cutting scissors. The pouch comes with heavy duty stainless steel trauma shears attached with a large easily accessible handle. Fitted with a 1 inch webbing securing strap and stainless steel press stud, and D-ring for easy opening. The pouch also has a velcro removable separator. Comes with a two inch webbed handle which has been designed for ease of opening with thick gloves on, The size of the pouch is 9x9 inch in size and has a velcro fastening. Manufactured from heavy duty textured nylon and sewn with a nylon thread. Price: £45.00

NAS 2 Pocket Pouch Two zipper pockets with toggles on zips,ideal for slates and back up equipment such as Jon lines, torches etc. Features 11x8 inch, stiffened heavy duty polypropylene material so it does not crunch up when on the harness. Two YKK plastic zips are used and toggles attached for ease of opening the pockets. Manufactured from heavy duty textured nylon and sewn with a nylon thread. Price: £45.00

NAS 2 Pocket Pouch (with net cutting scissors) Two pocket pouch with net cutting scissors. 11x8 inch, Two zipper pockets with toggles on zips, stiffened heavy duty polypropylene material so it does not crunch up when on the harness, ideal for slates and back up equipment such as Jon lines, torches etc. The pouch comes with heavy duty stainless steel trauma shears attached with a large easily accessible handle. Fitted with a 1 inch webbing securing strap and stainless steel press stud, and D-ring for easy opening. Manufactured from heavy duty textured nylon and sewn with a nylon thread. Price: £45.00

Online Catalogue | Dive | Narked at 60 |  Storage

© 2008 Robin Hood Watersports  Contact Us | Privacy Policy | Terms & Conds